GB 3087 Grade 10 Seamless Boiler Tubes
GB 3087——Seamless steel tube for low and medium pressure boilers
GB 3087 standard is applicable to the manufacture of high-quality carbon structural steel hot-rolled (extruded, expanded) and cold drawn (rolled) seamless steel tubes for various structural low-pressure and medium-pressure boilers and locomotive boilers.
GB 3087 grade 10 seamless steel pipe is mainly used for manufacturing heating surface of industrial boiler, with working pressure ≤ 5.9mpa
When GB 3087 grade 10 is used as heating surface pipe, the maximum wall temperature ≤ 480 ℃, and when GB 3087 grade 10 is used as header and steam pipe, the maximum wall temperature ≤ 430 ℃.
GB 3087 Grade 10 Seamless Boiler Tubes Quick Details
Manufacture:Seamless process ,Hot-finished or Cold-finished
Wall thickness(WT): 3.2 mm——21 mm.
Outer diameter (OD): 33 mm——323 mm
Length: 6M or specified length as required.
Ends: Plain End, Beveled End, Treaded
(1)Method of manufacturing steel
Steel are manufactured by electric furnace, oxygen converter or open hearth method.
(2)Manufacturing method of tube blank
The tube blank can be produced by a hot rolling method, and a continuous casting billet or a steel ingot can also be used.
(3)Manufacturing method of steel pipe
The steel pipe can be manufactured by a hot rolling (extrusion, expansion) or cold drawing (rolling) seamless method.Delivery status
Steel pipes shall be delivered in hot rolled or heat treated condition.
The finishing temperature of the steel pipe delivered in the hot rolled state shall not be less than Ar3.
Chemical composition of GB 3087 Grade 10
Mechanical properties of GB 3087 Grade 10
Allowable deviation of outer diameter and wall thickness
|Type of steel pipe
|Hot rolled tube
|Cold drawn tube